hollow sections, hollow pipes manufacturers, square hollow sections, rectangular hollow sections hollow pipes sections, hollow pipes suppliers, rectangular hollow pipes
About UsProcessPackingContactE-mailQuery Our Products
Holloe [square pipes]

Dimensions & Properties of Square Hollow Sections

Designation
(mm)
D x W x T		 Depth
(mm)		 Thickness
(mm)		 Weight
(Kg/m)		 Area of
Section
(cm2)		 Moment of
Inertia
(cm4)		 Radius of
Gyration
(cm)		 Elastic
Modulus
(cm3)		 Plastic Modulus
(cm3)
25.0 x 25.0 x 2.6 25.0 2.6 1.69 2.16 1.72 0.89 1.38 1.76
25.0 x 25.0 x 3.2 25.0 3.2 1.98 2.53 1.89 0.86 1.51 1.98
40.0 x 40.0 x 3.2 40.0 3.2 3.49 4.45 9.72 1.48 4.86 6.01
40.0 x 40.0 x 3.6 40.0 3.6 3.85 4.91 10.45 1.46 5.22 6.53
40.0 x 40.0 x 40 40.0 4.0 4.20 5.35 11.07 1.44 5.54 7.01
49.5 x 49.5 x 2.9 49.5 2.9 4.07 5.19 18.37 1.88 7.42 8.93
49.5 x 49.5 x 3.6 49.5 3.6 4.93 6.28 21.42 1.85 8.66 10.60
49.5 x 49.5 x 4.5 49.5 4.5 5.95 7.58 24.64 1.80 9.96 12.47
Steel Pipes
Hollow Pipes
CR Sheets
Galvanized Coil
square hollow sections pipes, rectangular hollow pipes sections, indian hollow sections



hollow pipes sections, hollow pipes suppliers, rectangular hollow pipes


Dimensions & Properties of Rectangular Hollow Sections

Designation
(mm)		 Weight
(Kg/m)		 Area of
Section
(cm2)		 Moment of
Inertia
(cm4)		 Radius of
Gyration
(cm)		 Elastic
Modulus
(cm3)		 Plastic Modulus
(cm3)
D x W x T - - X - X Y - Y X - X Y - Y X - X Y - Y X - X Y - Y
50 x 25 x 2.9 2.98 3.80 10.93 3.60 1.70 0.97 4.37 2.88 5.72 3.48
50 x 25 x 3.2 3.24 4.13 11.63 3.80 1.68 0.96 4.65 3.04 6.14 3.73
60 x 40 x 2.9 4.12 5.25 24.74 13.11 2.17 1.58 8.25 6.56 10.25 7.73
80 x 40 x 2.9 5.03 6.41 50.87 17.11 2.82 1.63 12.72 8.56 16.07 9.88
80 x 40 x 3.2 5.50 7.01 54.94 18.41 2.80 1.62 13.74 9.21 17.46 10.72
80 x 40 x 40 6.71 8.55 64.79 21.49 2.75 1.59 16.20 10.74 20.91 12.77
100 x 50 x 3.2 7.01 8.93 112.29 37.95 3.55 2.06 22.46 15.18 28.20 17.37
100 x 50 x 4.0 8.59 10.95 134.14 44.95 3.50 2.03 26.83 17.98 34.10 20.93


Technical Specifications
Relevant Code : IS:4923
Dimensional Tolerance
Thickness: All size ± 10%
Length: Normal 6.25 meters with tolerance ± 250mm
Straightness: Unless otherwise arranged , the closed structural shall have straightness of Minimum 1:200 on any length measured at the centre of the length (mill straighten condition)
Weight: On individual length: ± 10%, -8%. On lots of 10.0 tons ± 7.5%
Weldability: RHS/SHS are weldable without any preheating with standard electrodes
Physical Properties: Minimum yield stress = 310 Mpa, Minimum tensile stress= 410 Mpa, % Elongations: 15 min.





hollow steel pipes, pipes fittings, galvanised pipes fittings, steel pipes sheets, steel galvanised pipes

hollow sections, hollow pipes manufacturers
square hollow sections, hollow pipes sections, rectangular hollow sections, hollow pipes suppliers
hollow pipes, hollow sections pipes, square hollow sections pipes, rectangular hollow pipes sections
indian hollow sections, steel square hollow sections
STEEL PIPES | HOLLOW SECTIONS | CR SHEETS | GALVANISED COIL
Home | About us | Process | Packing | Contact | E-mail | Query
© Copyright Hitech Pipes All Rights Reserved
Site Developed by IndiaMART InterMESH Ltd.		 Member IndiaMART.com